Crank Shortage

Spend a few minutes/hours shortening a pair of cranks for my kiddo, Put in some extra style & speed holes for kicks. I forget how long they were before I started, but they are 100mm long now. Going on a 16" wheeled BMX bike. Spin it to win it... Spot faced, drilled and tapped

Extra Holes and a tumbled finish ..

Carrizo Ramble

Back at it with a ride report from May of 24'. Filling the content void on my blogger webpage with anything I can.

Lonely roads with my friend Brian..

Even more lonely, windy too.

That one shade tree, always my favorite spot.

Tailgate camper, it's a vibe...

Until next time...

Content flow zone

Making something out of nothing and riding trails on my bicycle is where it's at. Homemade chopper/rake/tamper that I made from a scrap piece of 3/16" steel ( probably mild steel ) .

Did a quick layout for the shape and then cut it up on the bandsaw

Cleaned up the teethy tangs with an angle grinder and called it good, ruff and tuff & down and dirty, its nasty... Then brazed a sleeve and binder boss on it for a 1 1/4" broom stick.

Lets roll....