LINKS & INFO

▼

Wednesday, November 21, 2007

you stab em' we'll slab em'--you want it we'll build it

Hey Folks
Been getting somes calls about Unicycle frames... I still make them and like to make them. I don't ride them ( confession ) but I can build them...I can build lots of stuff that I don't really want to ride, like 16" BMX bikes, I would knock my teeth out with my knees !!!
Uni frames built to order, any wheel size up to a 36er...So cute...
at

6 comments:

  1. Anonymous11:14 AM

    Nice!

    Will your unicycles accept the 2008Schlumpf geared unicycle hubs, and/or would you build to the bearing specifications of those hubs? One has a 40mm spec and the other 42mm.

    Info: from http://www.schlumpf.ch/uni_engl.htm

    Standard hub FSU:

    Crankarms: for square end axles

    Bearings:
    - diameter: 40mm
    - width: 12mm

    Quality: sealed high quality ball bearings

    Distance between centerline of left to centerline of right bearing:
    - hubs of model year 2007: 90mm
    - hubs of model year 2008: 100mm

    Muni hub KHU:

    Crankarms: ISIS

    Bearings:
    - diameter: 42mm
    - width: 12mm

    Quality: sealed high quality ball bearings

    Distance between centerline of left to centerline of right bearing: 100mm

    ReplyDelete
  2. Hunter Cycles11:56 AM

    Howdy...
    Wow thats a lot of #'s...
    My frames take a 40mm bearing... Otherwise I can work with all the other specs.. Best thing to do would be to send me the wheel or hub and I can build around it..
    Thanks
    Rick

    ReplyDelete
  3. Anonymous2:28 PM

    Rick built my first V-frame road uni, a custom shape with a separate seat tube and handlebar mount. His work product is impeccable (you just can't peck it!). Well worth it.

    ReplyDelete
  4. Anonymous3:52 AM

    I'm in the UK, which would make sending you a wheel/hub difficult, but if you *can* build frames that'll take the new KH-Schlumpf ("Muni hub KHU") hubs, I'd be interested too...

    Alan
    email address is my nickname [at] cam [dot] ac [dot] uk

    ReplyDelete
  5. Hunter Cycles10:15 AM

    Hey ladies and gents...
    Doing some research on the Schlumpf hub and I should be able to help you out. The standard hub would be no problem and no extra charge. For the muni version I would have to make some special bearing holders to accept the 42mm bearings. So yes I can make them...
    Cost is...standard 375$--- 400$with brake mounts
    muni 42mm 425$---450$ with brake mounts
    includes choice of color and custom sizing...
    Feel free to e-mail me directly, thanks
    rick@huntercycles.com

    ReplyDelete
  6. Anonymous10:39 AM

    I am very happy with the 700c/29" unicycle Rick built for me. In fact, I plan to order another soon.

    ReplyDelete